Sports Turf
For trials in backing compounds used with artificial turf designed for sports-surface production.
Artificial Grass Backing
Latex HZ-3610 Grass
A latex grade offered for artificial-grass backing systems, where fibre anchorage, coating behaviour and finished-turf performance must be assessed together.
- ApplicationArtificial Grass Backing
- General RoleCoating Binder
- Commercial FormLiquid Latex
Product Overview
A backing binder for artificial-grass production
Latex HZ-3610 Grass is offered for evaluation in artificial-grass back-coating systems. In turf manufacturing, a formulated latex coating is applied to the underside of the tufted construction and cured under controlled production conditions.
The backing compound helps secure the synthetic fibres and supports the integrity of the finished turf. Actual results depend on the full formulation, backing substrate, coating weight, drying profile and final turf construction.
HZ-3610 is a commercial grade reference, not a complete specification. Polymer chemistry, physical properties and acceptance limits must be checked against the current supplier TDS and the COA for the supplied batch.
Application Areas
Built around artificial-grass backing requirements
Final suitability must be established on the customer’s actual turf construction and coating line.
Landscape Grass
Can be evaluated in coating systems for landscape and decorative artificial-grass constructions.
Recreational Turf
Suitable for technical assessment in leisure and general-purpose synthetic-turf backing systems.
Formulated Back Coatings
May be assessed with approved fillers, thickeners and process additives after compatibility testing.
Before You Order
Qualify the grade on the complete turf system
Backing performance is a finished-system result. The latex should be assessed with the intended yarn, primary backing, formulation, application method and curing conditions.
Share an approved specification, reference sample or current compound information where possible. This provides a clear basis for technical and commercial review.
Discuss Your RequirementMaterial Specification
Confirm polymer chemistry, solids content, viscosity, pH, stability and dry-film data.
Coating Process
Review formulation, filler loading, coat weight, line speed and drying or curing profile.
Finished-Turf Testing
Evaluate tuft bind, adhesion, dimensional stability, drainage and durability as required.
Documents & Delivery
Confirm TDS, SDS, batch COA, packaging, required quantity and destination.
Storage & Handling
Protect the dispersion and follow the current SDS
Handling and storage requirements depend on the exact polymer system, preservatives and additives used in Latex HZ-3610 Grass. Personnel should follow the current supplier SDS.
- Keep the original container tightly closed and prevent contamination during storage and transfer.
- Follow the supplier’s stated storage-temperature range and protect the material from unsuitable temperature extremes.
- Avoid direct eye or skin contact and use the ventilation and protective equipment specified in the SDS.
- Use approved procedures for spills, wastewater, disposal and cleaning of coating equipment.
This page provides general commercial information. It does not replace the grade-specific SDS, workplace risk assessment or production trial.
Request a Quotation
Send the details needed for review
Include the information below for a useful technical and commercial response. Attach an approved specification or recent test report if available.
- 01Turf construction
Sports, landscape or leisure turf, including yarn and backing details.
- 02Coating process
Current formulation, application method and required finished performance.
- 03Required quantity
Trial requirement, one shipment or expected regular volume.
- 04Destination and documents
Country or port together with the required TDS, SDS, COA and packaging.
Product Questions
Latex HZ-3610 Grass FAQs
Review the current grade documentation and validate performance before commercial use.
What is Latex HZ-3610 Grass used for?
It is offered for evaluation as a binder in artificial-grass back-coating systems. The final compound helps anchor the tufted fibres and support the backing construction.
Is HZ-3610 confirmed as SBR latex?
The grade name alone does not confirm its polymer chemistry. Check the latest supplier TDS before describing or approving it as SBR, XSBR, acrylic or another latex type.
Can it be used for every type of artificial grass?
No universal suitability should be assumed. The grade must be tested with the intended yarn, backing substrate, compound recipe, coating equipment and curing conditions.
Which finished properties should be checked?
Testing may include tuft bind, backing adhesion, dimensional stability, drainage, flexibility, water resistance and durability according to the intended application.
Which documents should be requested?
Request the latest TDS and SDS together with a lot-specific COA and current packaging information for the exact material offered.
Product Enquiries
Need a current HZ-3610 Grass offer?
Send the turf construction, coating process, quantity and destination. Our team will review the details and respond with the available grade information.